Products
(Displaying 26 of 26)
The Smart Network Access (SmartNA) System is a flexible and customisable TAP solution, designed as a portable as well as an enterprise custom fit for any data centre.
(+)
The Nextragen Trafficlyser nTG|Small is a modular build measurement adapter that can act as a remote station for the Trafficlyser products Tracesim VoIP and easyVT.
(+)
The Nextragen Trafficlyser easyVT Easy VoIP Tester is a software tool which simulates VoIP connections at the ethernet node. It is particularly optimised for the measurements of VoIP systems equipped with auxiliary functions. The user interface is user...
(+)
The Network Critical Aggregating Filtering System (AFS) is said to provide the most flexible way to gain access to traffic anywhere in a network.
(+)
The Tecnalia GPON tester can be used for validation and certification of a GPON network. It consists of OLT-Emulator and GPON-Tester.
(+)
The Argus Tester verifies VDSL2, ADSL, SHDSL and gigabit ethernet including copper and Triple Play tests. The combi tester combines all standard broadband interfaces (ADSL, VDSL, SHDSL) and fast gigabit ethernet interfaces with comprehensive Triple Pla...
(+)
The Argus 145 plus combi tester is claimed to be the only handheld tester and analyser to integrate all interfaces for VDSL2 (all profiles), ADSL (Annex A, B, J, L, M) and SHDSL (2-, 4- and 8-wire), ethernet, ISDN PRI/E1/BRI S/T/U and POTS in a single ...
(+)
The iTrinegy INE Ultra 10G (40 Gbps aggregate capacity) next-generation multipath network emulator replicates high-speed, high-volume networks for large-scale testing.
(+)
Friendly’s TR-069 device management suite allows carriers and xSPs to reduce the deployment, management and support costs of data, VoIP, IPTV and Smart Home services. Based on the TR-69 and SNMP standards, the solution streamlines and simplifies ...
(+)
iTrinegy Network Emulator-Enterprise (Gigabit - 10/100/1000) network environment emulator is available in both portable and rackmount formats. It is a suitable tool for emulating the conditions likely to be encountered in a live application rollout.
(+)
The architecture of the OSA 453x Series GPS and GPS-less synchonisation receivers and re-timers is designed to maintain the strict CDMA holdover specifications. The series is also suitable as a synchronisation source for UMTS, WCDMA and cdmaOne, as wel...
(+)
The Oscilloquartz OSA 5240 GPS receiver is specifically designed for the synchronisation of 2G, 2.5G and 3G mobile networks and SDH/SONET transport networks. It is also suitable for DAB and DVB-T broadcasting networks and mobile location services such ...
(+)
The Oscilloquartz OSA 5548C synchronisation supply unit (SSU) is designed to provide telecom operators with reliable synchronisation, using the latest in hardware and software technologies.
(+)
The Oscilloquartz OSA 5331 PTP Grandmaster is designed to serve reliable time, phase and frequency to numerous PTP slaves due to its dual PTP ports along with a powerful PTP engine. The device consists mainly of a GNSS-receiver (GPS + GLONASS) and a PT...
(+)
Xena Networks has developed what is claimed to be the world’s first tri-speed 10-40-100 Gbps ethernet test module. The M1CFP100 test module was designed for carriers, enterprises and research departments that are migrating to 100 GbE solutions fo...
(+)
Xena Networks’ ‘tri-speed’ 10/40/100G test module for its XenaCompact and XenaBay chassis can be used for BERT, load-stress and functional testing of ethernet equipment and network infrastructure.
(+)
The Oscilloquartz OSA 5210 telecom GNSS synchronisation clock can be used for referencing mobile and SDH/SONET networks. Depending on its internal receiver configuration, the clock is capable of referencing the GPS network or the GLONASS network. A con...
(+)
Weighing less than 2.5 kg, the TX300/e is a small, full-featured 10 gigabit next-generation network analyser.
(+)
The VeEXMLX100 Metro Loopback Expert is an intelligent ethernet loopback device developed as a companion to the MX100+, MX120+, MX300 and TX300 products. Loopback control can be performed in-band or via the built-in 10/100Base-T ethernet port via an in...
(+)
The VeEX MPX100 Metro Probe Expert is an intelligent probe that can be deployed at any strategic network demarcation point or customer location where network service and performance assurance is critical.
(+)
The VePAL TX130M+ is a full-featured mobile backhaul test solution supporting legacy PDH/DSn, carrier ethernet technologies and synchronised packet networks. The unit is capable of emulating both master and slave clocks according to ITU-T G.8261 SyncE ...
(+)
The VeEX MLX300 Metro Loopback Expert is an intelligent 10GE loopback device developed as a companion to VeEX 10GE testers. Loopback control can be performed in-band over the fibre interface or via the built-in 10/100Base-T ethernet port via an interne...
(+)
The VeEx VePAL TX300/e network analyser weighs less than 2.5 kg and is said to be the smallest full-featured 10 Gb next-generation network analyser available.
(+)
The VeEx VePAL MX300 test set can be used for mobile backhaul and carrier ethernet testing. The 10GE including optional dual 1GE and 10/100/1000BaseT test ports are housed in the claimed smallest metro/ethernet tester.
(+)
The VePAL CX380 and CX380-D3 are super-tech installation and maintenance tools for next-generation CATV networks. Equipped with a 7″ touch-screen colour LCD and intuitive graphical user interface, the CX380 and CX380-D3 can be used under all ligh...
(+)
The VeEx VePAL MX100e+ handheld ethernet test set can be used for mobile backhaul and carrier ethernet testing. It is a low-cost version of the MX100+ product family with added solutions for applications such as ITU Y.1564 and ethernet OAM testing.
(+)
