Products
(Displaying 40 of 40)
Available to rent, the JDSU Singlemode OLS OLP-35 light source and power meter provides standard level testing for any telecom, CATV or military application.
(+)
Available to rent, the JDSU EDT-135 E1 and Data Tester can be used for the installation, commissioning and maintenance of digital networks, E1, datacom and V.24 modem circuits and multiplexers.
(+)
Available to rent, the JDSU SmartClass E1/Datacom handheld field tester can be used for the installation and commissioning of E1 and Datacom services, offering multiple test modes for E1 and Datacom signal analysis.
(+)
Available to rent, the Flir E60 InfraRed Camera is a user-friendly thermal image camera. Featuring a 3.1 megapixel digital camera with 76,800 pixels (320 x 240) resolution and 60 Hz refresh rate, it is suitable for locating issues with electrical equipment, identifying faults in circuits and aiding in research and development or predictive maintenance identification.
(+)
Available to rent, the Fluke DTX-1800, 900 MHz CAT 7 CableAnalyser accurately tests cable certification up to Category 7 a claimed three times faster than others, streamlining every aspect of the certification job from set-up, testing and troubleshooting, to reporting results.
(+)
Available to rent, the Anritsu S332E Site Master with indoor/outdoor mapping and AM/FM/PM demod and analysis measures return loss, VSWR, cable loss and distance-to-fault. It is also used for indoor/outdoor coverage mapping by wireless service providers, contractors, aerospace and defence, military and public safety.
(+)
Available to rent, the Exfo FTB-860G NetBlazer 10G ethernet tester allows field technicians to perform RFC 2544 measurements and EtherSAM (ITU-T Y.156sam) for turnkey deployment, validation and troubleshooting of 10 Gbps access and metro ethernet services with ease in any environment.
(+)
Available to rent, the Anritsu S331E Site Master cable and antenna tester is a portable and compact handheld cable and antenna analyser.
(+)
Available to rent, the Anritsu MT9083B Access Master optical time-domain reflectometer (OTDR) reduces testing times to install and maintain FTTx, CATV, LAN, Access and Metro Networks. The device is able to test PONs with both high resolution and high dynamic range.
(+)
The Fujikura FSM60S splicer and CT30 cleaver are now available to rent.
(+)
Available to rent, the Spirent Communications SPT-9000A TestCenter is a network performance analysis system with both software and hardware components that condense the testing process and increase productivity for 10 Mbps to 100 Gbps networks.
(+)
Available to rent, the Fluke DTX-MFM2 multimode fibre module serves as an adapter for the Fluke DTX cable analyser. It measures optical power loss, length and propagation delay for multimode fibres when testing fibre installations in local area networks and data centres.
(+)
Available to rent, the JDSU ANT 5 SDH/PDH access tester streamlines installation and maintenance testing.
(+)
Available to rent, the Exfo AXS-200-850 ethernet test set provides comprehensive test functionalities for installs, turning up or maintenance of ethernet and IP services. Examples include the activation and maintenance of metro ethernet networks, deployment of active ethernet (point-to-point) access services, and traffic generation and monitoring for network performance testing.
(+)
Available to rent, the NTi Audio digital test set, comprising the Digirator and Digilyser, produces digital audio signals and analyses those signals up to and including 5.1 surround sound.
(+)
Available to rent, the HP/Agilent MSO6104A 1 GHz digital oscilloscope with Logic is suitable for mixed analog and digital signal analysis. Flexible triggering enables easy isolation and analysis of complex signals and fault conditions.
(+)
Available to rent, the Fluke Optiview Pro Gigabit Series III LAN analyser gives users a clear view of the entire enterprise - providing visibility into every piece of hardware, every application and every connection on the network.
(+)
The Fitel S178 fusion splicer and S325 cleaver are now available to rent.
(+)
The Wohler VIS340 service camera visual inspection system is used for inspecting drainage pipes, air ducts and intermediate ceilings, to view any potential issues. It is available to rent.
(+)
The Fluke Optifiber MM (multimode) optical time-domain reflectometer (OTDR) is used for troubleshooting and certifying mission-critical LAN fibre networks. It is able to pinpoint multiple events as close as 1 m apart - even in short fibre runs, saving time on overlooking or zeroing in on faults that elude long event dead zones. It is available to rent.
(+)
Available to rent, the Emerson 475 field communicator can be used to configure field devices and perform diagnostics for effective troubleshooting.
(+)
The JDSU fibre inspection-capture probe is a handheld device that provides a high-performance video probe microscope system that can be configured. It is available to rent.
(+)
The JDSU MTS-8000 STM-64 transport module is used for verifying and qualifying the performance of a PDH SONET/SDH telecommunications network up to 10 Gbps. It is available for rent.
(+)
The Megger TDR 2000 can perform single- and dual-channel measurements on a wide range of metallic cables.
(+)
TechRentals has introduced the Fluke DTX Optical Time Domain Reflectometer (OTDR) into their extensive test and measurement rental fleet.
(+)
TechRentals has introduced the Kingfisher KI73410 two-way insertion and return loss test set into their test and measurement rental fleet.
(+)
The Fluke DTX Siemon Tera Adapter Kit is a fast, accurate way to certify Class F cabling systems to ISO standards using the TERA connector system.
(+)
The JDSU SmartClass E1 is a handheld field tester for installation and commissioning of E1 and Datacom services. It also offers multiple test modes for E1 and Datacom signal analysis.
(+)
The Narda NBM-550 makes accurate measurements of non-ionising radiation from various transmission facilities, such as towers for general public and occupational exposure.
(+)
The EXFO PPM-352 pon power meter and FIP-400 fibre inspection probe is a complete kit that is a suitable tool for FTTH/FTTP service activation, troubleshooting and accurate testing.
(+)
The Nettest CMA 5000 43/45 dB OTDR uses a combination of high-performance hardware and easy-to-use software. It has a dedicated touch screen and hard key user interface. The application reduces the time to install, commission and maintain fibre spans.
(+)
Operating in the 5.4 and 5.8 GHz unlicensed bands at data rates up to 105 Mbps, the Motorola wi4 Fixed Point-to-Point (PTP) 500 Series Wireless Ethernet Bridges are designed to reliably transport data, voice and video communications in virtually any environment — non-line-of-sight, high interference and long-range line-of-sight paths, over water and open terrain, even extreme weather conditions.
(+)
Troubleshooting or just maintaining a network can be time consuming and costly. Using Fluke Linkrunner Pro combined with Fluke Etherscope is an easy and non-expensive way to not only troubleshoot frontline IT problems and in-depth LAN analysis but also determine the quality of a LAN with RFC2544 tests which include latency, loss and BERT throughput.
(+)
When the Kingfisher KI7827B optical light source with APC (angled physical connection) is used in conjunction with the KI7600 optical power meter, together they can test loss on singlemode optical fibre systems.
(+)
Do you qualify, troubleshoot and determine the fault location of POTS, ADSL1/2/2+, VDSL, HDSL, HDSL2 & 4, ISDN, E1 and DDS communications services? If so, the Fluke 990DSL CopperPro Series II is the tool for you.
(+)
Fusing optical fibres claims to be faster and easier using the handheld Fitel core alignment fusion splicer.
(+)
The Airebeam products claim to be the only E-Band products in the market providing full-duplex and full-throughput point-to point connectivity at gigabit ethernet and fast ethernet speeds.
(+)
Motorola's solutions bring simplicity and reliability to wireless broadband and are suitable for enterprise, councils, schools, hospitals and ISPs.
(+)
The Digital Lightwave NIC Plus is a portable network test tool for verifying and qualifying the performance of SDH and DWDM.
(+)
The Fluke Etherscope Series II Network Assistant is a powerful handheld network troubleshooter for 10, 100 and gigabit, copper, fibre and wireless LANs.
(+)
